How to go to bios in hp

elitebook_5_original.

If you are confident that contacting the basic computer system system is indeed an extreme necessity - just a few seconds you will be known all variations in the BIOS. However, if you are new to, be afraid of your desire to find out the answer to the question that torments you: "How to go to BIOS in HP." Because, unconscious actions and incorrectly involved parameters may completely disable the computer.

From horror strokes

To enter the basic I / O system (BIOS), you just need to press the correct key on the computer keyboard at the time of its startup.

20150109.

However, even in the case when we are dealing with different modifications of desktop or portable computing devices from one manufacturer, the access scheme to the main settings of the PC is often different, thereby not rarely forcing the user to think about HP to enter the BIOS. But all these inconvenience are easily solved if you carefully look at the symbols displayed on the screen, in the first seconds of the computer launch.

Tip on display

one

As a rule, when the computing device is turned on, the laptop is not important, this or stationary machine, a service inscription is displayed at the bottom of the screen on which the key is activated by the direct call of the BIOS microsystem.

With which buttons you can go to the BIOS of the HP computer settings?

You are presented to your attention the most common keyboard combinations, when activated which the user can access the basic control system for the Hewlett-Packard brand.

  • For laptops, we click "ESC", then "F10" or "F12".
  • Stationary modifications (DesCTOP): "Delete", "F1" or "F2".

In particular "exotic cases" one of these combinations can be used:

3.

So, it's time to take advantage of the hint. Recall once again - changing critical parameters in the BIOS system can cost you expensive!

In the final can be like this: what to do, I can't get to BIOS?

Unsuccessful attempts to log in in the settings of the base system, in compliance with the condition "properly involved button", may be due to some technical factors. In particular, we are talking about, so to speak, the high-speed configuration of the computing machine.

Modern laptops began to be equipped with solid-state drives, which are capable of incredibly quickly loading the operating system. To couple with a giant amount of RAM, more than a "chip" central processor and technological perfection of MS Windows 8, such a "monster" is quite difficult to catch during the passage of instructions. What needs to be done in such a situation, read here . Use the computer correctly!

The need to open the BIOS (Basic I / O) system may occur for various reasons - from reinstalling the OS to the need to change some inaccessible parameters in the usual interface or securely protect the laptop password. On the HP laptop, go to the BIOS is easy - the manufacturer usually uses standard keys. Difficulty can cause a quick download of new versions of Windows, but this problem is easy to eliminate.

3 ways to go to the BIOS (UEFI) on the HP laptop

On modern laptops, a UEFI is still used in low levels - a firmware that is safer and functional than BIOS, in addition, it can be controlled by its interface using the mouse, not the keyboard. For a standard user, the differences are not too significant, it is only important to know that the principle of loading is the same.

There are 3 main ways to enter the BIOS. Which one is suitable in a particular case depends on the version of the installed software, as well as from the OS distribution.

Directly

The easiest option works on most laptops. Based on the cluster of a specific button when the device is started. On HP laptops, get into the BIOS usually allows one of the following keys:

Less often (as a rule, in old models) use F6, F8, DEL.

In addition, you can view the desired key or the combination when the laptop is turned on - before starting the OS boot, the screen appears on the screen (the button name is on the site of figure brackets in the Press {} to Enter Setup row).

Through the boot menu

On some models of laptops to go to the BIOS, you need an intermediate step. First you need to open the boot menu, in the HP laptop it uses one of two keys:

  1. Escape.
  2. F1.

Through the boot menuThe button should be started pressing when the device is turned on, after which the list of possible actions and commands will appear for their execution. The required string contains the word "setup" and (not always) the name of the firmware - BIOS or UEFI. F10 is used to enter the interface.

In addition, the following sections can be opened in the boot menu:

  • System Information - contains information about the installed "hardware".
  • System Diagnostics - allows you to start the diagnostics of part of the equipment.
  • Boot Device Option - provides a selection of a device from which the laptop will start.
  • System Recovery - Runs OS recovery mode.

Some versions offer only the choice of settings or boot device.

Thus, the boot menu allows you to solve some of the tasks without opening directly bios.

For users of Windows 8 and 10

On HP laptops with the latest distributions, quick start mode is activated by default. The switching on the laptop occurs markedly faster, but it is impossible to enter the BIOS.

The easiest way to "bypass" mode is to start the I / O system when the device is rebooting, since it occurs at a standard speed. There are other options.

Through restoration

This method is convenient if it did not work out to choose the desired key to enter the BIOS or there are problems with the keyboard. On the laptop included:

  1. Through the "Start" menu, go to "Parameters".
  2. Open the "Update and Security" section.
  3. In the left menu, find the item "Restore", click on it.
  4. On the right will appear options. Under the heading "Special download options" find the "Restart Now" button and click on it.
  5. The submenu will open, where to click on the "Diagnostics" item.
  6. When rebooting, a list of possible operations will appear, the desired option is "Troubleshooting and Troubleshooting".
  7. In the open section, click on the "Advanced Parameters" item.
  8. Find a string offering Change UEFI or BIOS settings. Press it, confirm the reboot.

When you start a laptop, the I / O System menu opens.

By changing the download parameters

In order for the BIOS to be available without switching on Windows, you can deactivate quick start. This follows:

  1. Open the control panel. It can be found by searching inside the "start" or by calling the context menu with a click right-click on the menu icon.
  2. Go to the power management section. Select "Actions Power Buttons" in the left menu.
  3. A window will open, where you need to click on the active row intended for editing inaccessible parameters now.
  4. At the bottom of the window to find a list of settings for completing the work and remove the checkbox from the item activating the quick start.

By changing the download parametersSometimes it is impossible to find the desired settings. Then you can try to edit the registry:

  1. Open command window Win + R combination
  2. Enter the "regedit" string, click on the "OK" button.
  3. In the left menu, the windows appeared to find the HKEY_LOCAL_MACHINE branch, deploy a double click.
  4. Sequentially open System, CurrentControlSet, Control, Session Manager and Power.
  5. After clicking on the last folder among the files that appeared on the right, find and open the HiberBootEnabled document. Change the value to 0 (zero), save.

After rebooting, the quick start will turn off and open the BIOS can be in the usual way.

How to go to BIOS on HP Laptop

How to go to BIOS on HP Laptop

Do you have a laptop of the American brand Hewlett-Packard, which was subsequently divided into two companies, and want to change something in the settings of his BIOS? Today you will learn how in the HP laptop you can go to BIOS, any model, through the preloading menu and the Windows 10 operating system tools.

First of all, a few words about the manufacturer. HP is a major American brand working in the production of measuring, chemical and medical equipment, as well as computing equipment. In 2015, the company breaks down on:

  • HP Inc. - specializes in computer equipment and printers;
  • HPE - business service (cloud structures, network technologies, supercomputers).

What is bios and why he need

Let's first find out what BIOS is and why it needs a motherboard. BIOS (on new motherboards and laptops it is replaced with an improved analogue of UEFI), though he has opposed his own, it still works on all computers purchased until 2015-2016, and this is not going anywhere.

Physically, it is a microcircuit that sews a set of firmware implementing API for:

  • Interaction of hardware components;
  • Equipment configuration;
  • Launch operating system;
  • Testing the performance of computer hardware components and a laptop.
How to go to the BIOS on the HP laptop. Two work options Go to BIOS settings

Fig. 1. BIOS.

For the entry into the BIOS, there must be good reasons, for example, a change in the system time, the priority of loading devices, and the like.

If you decide to update the firmware in Bios, but do not even know how to call it, it is better to abstain. Updating firmware - the lot of experienced users and specialized services.

When you want to change the parameters, for example, to load the device from the flash drive, correct the system time or reset the settings for default, please. Come on the table.

How to get into bios

There are two methods call BIOS on HP laptop:

one Special keys when testing equipment;

2Additional Windows 8 and Windows 10 boot options.

Consider them in order and more detail. For the table of contents.

What key to call BIOS on your model

Almost all manufacturers of system boards and laptop computers program different buttons to call the basic settings menu. Even in different models of one line of laptops, the input key in the settings menu may differ. Tip: If you need to get into the BIOS settings, open the instruction manual for your device. It certainly has a description of how to exercise in the BIOS of your portable computer.

In the absence of a paper version of the manual, it can always be found on the official support site in PDF format.

You can do otherwise, reboot the device and after self-testing the equipment carefully look at the screen. On it for a few seconds (usually at the bottom) alert is displayed about how you can call the desired interface in HP.

Seeing it, you must press the appropriate key on the keyboard.

How to go to the BIOS on the HP laptop. Two work options Go to BIOS settings

Fig. 2. Download window

If on most computers, the role of this key performs DEL, then for the laptop it is: key F10 (most popular) ESC, F1, F11 And other buttons from a number of functional. Note that they often perform a different role (turning off Wi-Fi, the volume adjustment), and they must be pressed along with the key.

In cases where you do not have time to see, where this inscription appears or on time to press the key to call the BIOS on your HP model, try to restart the laptop several times and each time you click one of the function buttons (except F8), Delete and Esc. Surely after multiple reboots, get to the required menu. A feature of many device from HP is that the basic settings window can be launched in them with two buttons pressed sequentially.

After on the screen (for example, on HP Pavilion), a menu will appear with the download options, where one of the function keys select the desired option:

  • F1. - information about hardware configuration;
  • F2. - Built-in diagnostic tools for testing equipment;
  • F9. - selection of the download device;
  • F10 - Configuring BIOS (Selecting it, go to the Base I / O configurator);
  • F11 - tools for restoring the system;
  • ENTER - Launch windows.
How to go to the BIOS on the HP laptop. Two work options Go to BIOS settings

Fig. 3. BIOS call key

Is the password in the menu? Not trouble, we will show how to reset the BIOS to the factory settings. To do this, remove the back cover, unscrewing several bolts, pull the CMOS power battery for a couple of seconds and insert it back. All is ready.

The same thing, but when the settings are not protected, you can implement via the corresponding menu item or the key.

How to go to the BIOS on the HP laptop. Two work options Go to BIOS settings

Fig. 4. Reset settings to factory

We looked at how to enter the BIOS through the tools that the developers were provided for this. Further you will learn how on a laptop with Windows 8 or 10 (relevant and for computers) to get into the BIOS.K table of contents

Operating system tools

The instruction is written on the example of Windows 10, but for Windows 8 all actions are similar.

one Calling Menu "Parameters" .

This is done in many ways:

  • through start;
  • The Win + X menu caused by the same combination of keys;
  • Combination of the Win + I buttons.

2In the Click window on the last pictogram.

How to go to the BIOS on the HP laptop. Two work options Go to BIOS settings

Fig. 5. Windows 10 parameters

3. Here we go to the tab "Restoration" and in the subsection with special download options choose "Reload now" .

How to go to the BIOS on the HP laptop. Two work options Go to BIOS settings

Fig. 6. Special download options

At the next start of the system, the restoration window will appear.

4In it, select "Diagnostics" or launch diagnostic tools.

How to go to the BIOS on the HP laptop. Two work options Go to BIOS settings

Fig. 7. Choose the item "Diagnostics"

5The next step will be a challenge of additional parameters.

How to go to the BIOS on the HP laptop. Two work options Go to BIOS settings

Fig. 8. Diagnostic tools window

6Here we bring the cursor on "Built-in software parameters" And perform the left click with the mouse.

How to go to the BIOS on the HP laptop. Two work options Go to BIOS settings

Fig. 9. BIOS Call through Windows 10 Advanced Windows

After us, it will be transferred to the menu where the BIOS parameters change.

Not all developers do so that newcomers figured out how BIOS is launched. From the other side, novice users will cause less harm to their machines, after all, after understanding the menu items, they begin to experiment, for example, with processor acceleration and are looking for information how to update the BIOS firmware.

And one incorrect action can lead to the fact that without visiting the service center, the laptop will be converted into a piece of metal and polymers.

P.S. Here is the actual entry process in the BIOS laptop HP. Consider if you are a PC user at the level of Novichki, my advice to you do not configure yourself BIOS. Not knowing and not understanding what he answers, you can greatly harm your laptop.

In my practice there were cases when after the user intervention in thin settings, the device was simply not subject to recovery.

How to go to BIOS in HP laptop?

Consider the most common Methods Log in BIOS on HP Laptop . The owners of these devices are often asked by this question, since the entrance to the BIOS on most of the Hewlett Packard models may differ from the standard shell opening procedure on the laptops from other manufacturers.

The need to start the interface occurs for various reasons. In some cases, users need to be switched to boot priority with HDD on the boot flash drive, in order to further update, reinstall or install the operating system. In others - view detailed information about connected to any computer or laptop equipment (motherboard, RAM, video card, processor, frequency and number of nuclei and so on).

Often Basic Input / Output System is used to test and change the configurations of hardware components. It is worth noting the useful option of resetting the BIOS settings to the factory, which will come in handy in the event of software failures and problems in OS. So, let's deal with how to enter the BIOS on your laptop.

How to get into the BIOS on the new Laptop model of the HP brand?

The instruction concerns modern Hewlett Packard released after 2013 . Often, when you turn on the computer on the screen, we simply do not have information required by us with the designation of the basic buttons.

If you have a box and laptop documentation, carefully examine the user manual in which it must be a hint, how to run BIOS / UEFI, given the specific HP model.

After turning on the laptop, you need to repeat the ESC button (3-4 times). You can also clamp it immediately before launching the laptop. A special window opens called Startup Menu. including the following positions:

  • F1 - SYSTEM INFORMATION. Here you can find out detailed information about the system.
  • F2 - SYSTEM DIAGNOSTICS. The utility is responsible for the diagnosis of OS.
  • F9 - BOOT DEVICE MAIN OPTIONS. The boot menu is displayed.
  • F10 - BIOS SETUP . You need to press the appropriate button to go to the BIOS / UEFI shell.
  • F11 - Recovery Tool. Can help recover the drive.
  • ENTER - continues the launch of Windows.
  • F12 - sets up network settings and servers.

If you do not have time to press the ESCAPE button, Windows will be loaded further by default!

In some cases, after rebooting or turning on the device, it is enough to press F10 several times.

Where is the input key in the BIOS on obsolete laptops?

In older (until 2013), HP laptop models use various versions of bios, respectively, the Basic System Configuration start button may differ. Previously, when loading the device, you can see the inscription at the bottom of the screen. Most often is F10 and ESC. Less frequently - Del, F11, F1, F6, F8.

If your laptop is produced until 2008, you still need to press the DEL key.

Keyboard combinations Fn + F1, Ctrl + Alt + Delete, Ctrl + Ins, Shift + F10 (for example, HP Pavilion G6, COMPAQ 6820S, 6910P and others are found.

There are rare cases when the user does not get into the interface due to the fact that the laptop works on the battery charge. Connect it to power from the outlet.

Simple options Log in to BIOS HP in Windows 8.1 and 10

Unlike Windows 7, XP and Vista, the eight and dozen users may not see the system buttons menu when laptops / netbooks are turned on due to the active fast loading mode. Consider the procedure for disabling this feature:

  1. Right-click on the "Start" menu;
  2. Select "Control Panel";
  3. We need a "Power" section, if it is not displayed, change the display from categories to large or small icons (located on the right upper part);
  4. In the left side of the window that opened windows, select "Actions of the Power Buttons";
  5. Further go to the section "Changing the parameters that are not currently available";
  6. Slightly lower, in the same window the tab will appear with the completion settings of the Operations;
  7. To disable fast boot, remove the checkbox from the "Enable Run" item and save the specified changes;
  8. Now try turning off the laptop, and when it is next, the screen will appear with the necessary information.

We go to the UEFI using the diagnostic function

  1. Click on the notification icon and select "All Parameters";
  2. Click "Update and Security";
  3. After clicking on the "Restore" line, under the "Special Download Options" section you need to click the "Reload Now" button;
  4. When the computer restarts you will see a special menu in which you want to select "Diagnostics";
  5. It remains to go to the "Advanced Settings" item and click "UEFI built-in parameters";
  6. Restart Laptop and get into the installed version of the BIOS.

How to go from a laptop in the BIOS settings from the welcome screen?

The method is useful for owners of Windows 8 and 10 with a blocked log in. That is, there is only a welcome window with a proposal to enter the password, but you either forgot it, or have witnessed the consequences caused by malware or incorrectly installed drivers.

  1. Click the "Power" button and holding SHIFT in parallel;
  2. A small window will open, click on the reboot;
  3. Further act similarly to the above item from our article.

Perfectly, when the laptop works and does not cause any complaints. Nevertheless, any user happens when it is necessary to change something in the settings, in particular, it may be necessary to reconfigure the BIOS. As soon as you open any forum or an article on setting up laptops, you can see that there is often discussed by how to go to BIOS in Hewlett-Packard laptops (HP), ASUS, Acer, and other companies. This suggests that many devices have nuances associated with the launch of BIOS.

How to enter BIOS in HP laptop

How to enter BIOS in HP laptop

In this article we will analyze a few questions, namely:

  • What is BIOS;
  • The keys responsible for entering the BIOS for Hewlett-Packard laptops (HP);
  • The BIOS startup process for Hewlett-Packard (HP) laptops in Windows 8 and 10 operating systems.

What is bios

BIOS is a microprogram complex that operates the basic I / O system in each computer. The system functionality makes it possible to customize the parameters of the motherboard and devices connected to it without the use of the OS. This system is installed on all motherboards.

On a note! Since the BIOS does not affect all sorts of failures, bugs and viruses in the operating system, if it does not work, we can use the settings in the basic menu.

Usually, users start the BIOS only when it is necessary to reinstall the OS. In fact, there are much more configuration options in it, with which you can significantly increase the performance of the laptop.

BIOS value and function

BIOS value and function

The BIOS menu can be performed as follows:

  • Control loading and order connected to a laptop devices. For example, the user can do so that it is not Windows first first, but a CD / DVD-ROM or a flash drive;
  • regulate the efficiency of the CPU, to carry out it "overclocking";
  • define the factory parameters of the computer;
  • customize time and time zone;
  • Select OS language, set passwords and so on.

Keys responsible for entering BIOS

It is best to seek help to instructions for a laptop. However, most often in it is not written in it. In a box with a gadget, except for the power supply, a talon for a guarantee and other documentation is usually nothing.

Keys to enter the BIOS from manufacturers

Keys to enter the BIOS from manufacturers

Since the Hewlett-Packard laptops models (HP) set, a specific standard on the input to the BIOS primary settings does not exist. Below we will look at the most common options.

Step 1. To begin with, turn on the laptop or restart the system.

Turn on the laptop

Turn on the laptop

Step 2. Immediately after turning on the screen, do not miss the inscription during the appearance of which it is possible to start the BIOS. As a rule, such a string is delayed in just a few seconds, and after the OS load begins.

During the appearance of the inscriptions on how to enter the BIOS, press the desired key several times.

During the appearance of the inscriptions on how to enter the BIOS, press the desired key several times.

It is at this time that the defined keys must be pressed:

  • «F10 "This key will work in 80% of cases, as it is default in most Laptop models and BIOS variations. First of all, it is better to try it, and only if the computer does not respond to pressing this key, then proceed to other possible options; During system boot, press the "F10" key to enter the BIOS

    During system boot, press the "F10" key to enter the BIOS

  • «ESC »In certain models of Hewlett-Packard laptops (HP), a slightly different way to open the settings in the BIOS is implemented. To begin with, you will need to press the key. «ESC »to enter the internal menu, and only after the key «F10 »to enter the BIOS; During system boot, press the "ESC" key to enter the BIOS

    During system boot, press the "ESC" key to enter the BIOS

  • «F11 "- this option is found much less frequent, but it is not necessary to forget about it if the first two ways did not bring anything; During system boot, press the "F11" key to enter the BIOS

    During system boot, press the "F11" key to enter the BIOS

  • «F6. "," F8. "," F2. "," Del. "- such keys options are very rarely found on Hewlett-Packard laptops, but also to try them; While loading the system, we try to press the "F6", "F8", "F2", "DEL" key to enter the BIOS

    While loading the system, we try to press the "F6", "F8", "F2", "DEL" key to enter the BIOS

  • «F1. "And" F10 "- acts as well as the second method (" ESC "). Immediately after launching the laptop, you press the "ESC" key, and fall into the inner menu. In it, choose "BIOS SETUP" and wait for its download. Press the "F1" key, then press the "F10" key in "BIOS SETUP"

    Press the "F1" key, then press the "F10" key in "BIOS SETUP"

Internal HP Laptop Menu

Read the detailed instructions in the article - "How to enable BIOS on HP Laptop".

  • «F1. "- all information about the Hewlett-Packard laptop is presented: model, serial number, assembly date, version BIOS, processor type, its frequency, operational memory, etc.; By pressing the "F1" key, we get into the window showing the system information about the laptop, click "ESC" to exit

    By pressing the "F1" key, we get into the window showing the system information about the laptop, click "ESC" to exit

  • «F2. "-" Diagnostic programs "with which it is possible to check the operation of RAM, HDD status and carry out other tests; By pressing the "F2" key, we get into the window showing a list of diagnostic programs.

    By pressing the "F2" key, we get into the window showing a list of diagnostic programs.

  • «F9. "- It is possible to select devices: CD / DVD-drive or a USB flash drive from which a laptop can start starts; By pressing the "F9" key, we can select the device from which the system on a laptop will be downloaded.

    By pressing the "F9" key, we can select the device from which the system on a laptop will be downloaded.

  • «F10 "- input to the BIOS settings; By pressing the "F10" key, we get into the bios

    By pressing the "F10" key, we get into the bios

  • «F11 »- Additional download options. Pressing the "F11" key, go to the additional download options window.

    Pressing the "F11" key, go to the additional download options window.

BIOS launch process for Hewlett-Packard laptops (HP) in Windows 8 and 10 operating systems

From the owners of modern laptops Hewlett-Packard (HP), the excellent reaction will accurately need to quickly find, and have time to press the desired key in time during the OS boot. And also not to skip while on the screen is visible a hint on how to enter the BIOS.

However, this is not all. Now the laptops instead of the usual mechanical HDD are installed solid-state SSD discs. The performance and speed of laptops is greatly improved and the Windows 8 and 10 boot process passes very quickly. Therefore, there is no point in turning on and off the laptop many times to catch.

On a note! In order to enter the BIOS menu, it is not necessary to disconnect the laptop.

For users of Windows 8 and 10 operating systems, you must perform the following:

  1. By clicking on the "Start" button, click on the "Parameters" string. Open the Start menu, click on the "Parameters" string

    Open the Start menu, click on the "Parameters" string

  2. Open the "Update and Security" item. Open the item "Update and Security"

    Open the item "Update and Security"

  3. In the "Update and Security" item, choose "Restore", and click "Reload Now." Choose "Restore", click "Reboot Now"

    Choose "Restore", click "Reboot Now"

  4. In the System menu, select the second option - "Diagnostics". Open the section "Diagnostics"

    Open the section "Diagnostics"

  5. Open the "Advanced Parameters" section. Click on the "UEFI embedded parameters". Open the "Advanced Parameters" section, click on the "UEFI embedded parameters"

    Open the "Advanced Parameters" section, click on the "UEFI embedded parameters"

  6. We enter the Hewlett-Packard laptop BIOS (HP). BIOS interface

    BIOS interface

In order for each time it does not go to the BIOS via Windows we will need:

  1. In the Start menu, we find the section "Control Panel". In the "Start" menu, we find and open the section "Control Panel"

    In the "Start" menu, we find and open the section "Control Panel"

  2. By selecting "Power Supply", click on the "Power Button Action". In the category "View", choose the value "Large icons", select "Power Supply"

    In the category "View", choose the value "Large icons", select "Power Supply"

    Click on the link "Action Power Button"

    Click on the link "Action Power Button"

  3. In the window we find the string "Changing the parameters that are not currently available", click on it. Click on the link "Changing the parameters that are not available now"

    Click on the link "Changing the parameters that are not available now"

  4. Remove the checkbox in front of the string "Enable fast start (recommended)". And click the Save Changes button. Clean the tick in front of the string "Enable a quick launch (recommended)", click on the "Save Changes" button

    Clean the tick in front of the string "Enable a quick launch (recommended)", click on the "Save Changes" button

After these manipulations, you can run the BIOS by pressing one of the keys on the laptop.

Video - How to go to the BIOS on the HP laptop

Did you like the article? Save not to lose!

Vhod-V-BIOS-NA-HPGood afternoon!

On the laptops from HP, the input to the BIOS is not a slightly standard (if most devices use the F2 or Delete buttons, then they have ESC). Moreover, it is often happening through add. System menu. Probably, therefore, not every user gets to immediately deal with this question ...

In addition, it is also worth noting another moment: the year of the device output. Depending on this, the input process can "divide" another pair of options. In general, everything is somewhat confused ;-)...

Perhaps it's time to finish entering, and go directly to solving the issue. So...

*

Several entrance options in BIOS on HP

1) If you have a deal with a relatively new device (~ Issue after 2013)

If your laptop is new - then when you turn on any boot screen, it will not show (approx. : on old devices after switching on the boot screen with keys to enter the BIOS) . Like it or not, but now this is the trend of manufacturers (including and HP): how quickly download Windows and present the user to go to work with OS (and as a rule, because of this, and it is not possible to go to the BIOS / UEFI).

Therefore, immediately after clicking on the power button - press the key sequentially ESC (repeatedly!) .A system menu must appear (as in the photo below) with several options. (approx. : to enter the BIOS - you need to click F10 ):

  1. F1 - view system information;
  2. F2 - diagnostics;
  3. F9 - view the boot menu;
  4. F10 - Login to BIOS / UEFI settings (What we need!) ;
  5. ENTER - Continue downloading (Windows).
The system menu on the HP laptop (called by key ESC)

The system menu on the HP laptop (called by key ESC)

Addition !

If you do not have time to press the ESC button before Windows downloads, you can press the ESC button before turning on the laptop (and keep it before the system menu appears).

By the way, on some laptop models, you can immediately press the F10 key after switching on (i.e., enter the BIOS without an intermediary in the form of a system menu).

2) If your laptop is already old enough ...

In this case, immediately after switching on you should display the download screen (on it, most often, the button is shown to enter the BIOS settings menu). Below in the photo shows a couple of options (in one case, the key is used to enter F10 , in a different ESC ).

Note! I also note that on laptops released approximately until 2008, a button can be used to enter the BIOS Delete. .

HP download screen

HP download screen

3) If you have installed Windows 10 ...

In this case, you can enter the BIOS, without pressing any system buttons at all (though, the method is suitable if the system is loaded, and you can open its parameters).

And so, first open the Start menu and go to parameters Systems (see screen below).

Parameters (Windows 10, Start Menu)

Parameters (Windows 10, Start Menu)

Then open the section "Update and Security" tab "Restoration" . It should have a button "Reload now" (See special download options).

Restoration - reboot now

Restoration - reboot now

Next, your laptop will be rebooted, in the menu that appears, select the option "Diagnostics" , After "Embedded Parameters" . Actually, here you are included in the BIOS / UEFI settings (see screenshots below).

BIOS (HP Pavilion G6 Laptop)

BIOS (HP Pavilion G6 Laptop)

4) Note!

F1, Delete, F11 . Pay attention also to these buttons. Some devices (mostly old) support only these keys to enter the BIOS (when you click on ESC - nothing happens on these laptops).

Specification . Pay attention to documents (unless, of course, they are preserved) who went along with the purchase of a laptop. Almost always contains similar information.

Connect the device to the network . The fact is that some laptops do not allow you to enter the BIOS when working from the battery (I do not know whether it is done specifically, or "glitch" ...).

To help!

Also correctly familiarize yourself with a large article with tables to enter BIOS on devices of different manufacturers - https://ocomp.info/kak-voyti-v-bios.html.

*

Additions are welcome ...

Good luck!

;-)

Donate.Dzen-ya.

Useful software:

  • Video editing
  • Video installation
  • Excellent software to create their first videos (all actions go along the steps!). Video will make even newcomer!
  • Utility for optimization
  • Computer accelerator
  • A program for cleaning Windows from "garbage" (deletes temporary files, speeds up the system, optimizes the registry).

Добавить комментарий